Tony Hawk Pro Skater 3+4: Grind the Molten Bucket Challenge Guide | Foundry

by

In Tony Hawk Pro Skater 3+4, one of the difficulties you’ll encounter at the Foundry level involves locating a bucket brimming with molten lava and executing a grind on it. However, as simple as that may sound, it’s quite challenging in practice. The bucket is situated in a tricky spot, and it doesn’t always appear. To add to the challenge, your character will have to endure intense heat while performing this stunt… but don’t worry! We’re here to guide you through this hurdle effortlessly.

Grind the Molten Bucket Challenge in Foundry | Tony Hawk Pro Skater 3+4

In order to complete this task, make your way to the very end or opposite side of the stage you’re on. You will find a half-pipe there, with a pool of molten lava situated before it.

Be sure to spot the large metal pail suspended over the molten lava pit, that’s your target! But remember, patience is key as you can only grind the bucket when it aligns horizontally to release lava. If it stands vertically, you must wait a short while first.

You should try to land on the side rails of the metallic pail. They’re located on both sides, and doing so will trigger an automatic grind, thereby finishing the task at hand.

The challenging part lies in reaching those rails; instead, use the nearby half-pipe to gather speed. Ensure you maintain your movement to build up momentum. When you sense the bucket is going horizontal, utilize the half-pipe to increase your speed further. Finally, leap off the ramp situated before the half-pipe and target the bucket’s sides as your landing spot.

If you’re facing difficulties because you’re not getting enough height due to jumping, you might find it helpful to attempt a No Comply. This involves pressing up on the d-pad before leaping. With this move, you’ll gain more altitude, making it simpler for you to grab that bucket!

Although this technique excels in terms of speed and points, it might prove challenging to perform correctly. If you’re finding it difficult, there’s another approach available that is less complex at the cost of speed.

Alternate Method

To begin with the alternative approach, immediately after starting the level, leap onto the catwalk that’s directly ahead and slightly to your right as the level begins.

Advance along the catwalk, then veer to your left. You’ll eventually find yourself in a suspended room, its walls adorned with gleaming glass panels. Once there, take a right turn.

Now, you’re looking at some beams that happen to be the spot where you can uncover the Secret Tape for the Foundry. Interestingly enough, a metal bucket is perched directly on these same beams!

At this stage, all you have to do is alight on the beam and bring yourself to a complete halt. Afterward, wait for the metal bucket to begin dispensing molten lava, then descend onto the bucket’s rails. Given that it might take a few attempts to find the precise landing spot, this method can be challenging but more straightforward!

One potential drawback of this approach is its speed; it might not be suitable for those aiming to finish all tasks in a single attempt or for those seeking top scores due to its slowness. However, given its ease of implementation, we believe it still offers value and warrants consideration as an alternative method.

Here’s a breakdown on accomplishing the “Grind the Molten Bucket” challenge goal in Tony Hawk Pro Skater 3+4. We trust that one of these techniques will help you out! Keep in mind, though, this task can take some practice as it may be challenging to execute successfully.

Read More

2025-07-09 13:06